Installing Microsoft TCP/IP

---------------------------

Install the TCP/IP protocol on your computer by carrying out the following steps. TCP/IP is the protocol your computer will use to connect to 

the Connection Sharing computer.www.tartoos.com

 1. In the Control Panel, double-click the Network icon.

 2. Click Add, click Protocol, and then click Add. 

 3. In the Manufacturers list box, click Microsoft.

 4. In the Network Protocols dialog box, click TCP/IP, and then click   OK.

 5. In the list of components, click your network adapter, and then   click Properties.

 6. Click the Bindings tab, and then select the check box next to  TCP/IP.www.tartoos.com

NOTE: Currently, the Browser Connection Setup wizard does not automatically install the TCP/IP protocol for network adapters.

TCP/IP Settings

---------------

To access the Internet using a Connection Sharing computer, ensure that the TCP/IP settings for your network adapter are set correctly by 

carrying out the following steps.www.tartoos.com

 1. In the Control Panel, double-click the Network icon.

 2. In the list of network components, click TCP/IP associated with your  network adapter, and then click Properties.

 3. Select the "Obtain an IP address automatically" check box.

 4. Click the WINS Configuration tab, and then select the check box  next to "Use DHCP for WINS Resolution".

 5. Click the Gateway tab, and then remove any installed gateways if any are listed.

 6. Click the DNS Configuration tab, and then select the check box next  to "Disable DNS".

 7. Click OK to accept the new TCP/IP settingswww.tartoos.com

 8. Click OK to update your new network configuration.

NOTE: These changes require restarting your computer for changes to take 		

effect. When you are finished, the computer will restart.