Home Networking: Choose the right hardware

Ethernet networks
For an Ethernet-based network, you'll need the following:www.tartoos.com

An Ethernet network adapter (either PCI or ISA) for your server and each of the other computers on the network

·                         An Ethernet hub with enough jacks and sufficient cable to connect all the computers and devices on your home network; or, if you opt for an Ethernet that uses external adapters, an external adapter for each connected computer

·                         Ethernet cable with RJ-45 connectors at both ends for each client computer, long enough to reach the hub

·                         An RJ-45 cable with connectors at both ends to connect the hub to the Ethernet card of the server computer (which must be running Windows Me)

Non-Ethernet networks
For a network that uses phone lines or wireless devices, you'll need the following:

·                         An external or internal network adapter for each connected computer

·                         If you will be using phone lines, an HPNA, a phone jack near each computer, and a standard phone cord with connectors at each end for each computer, long enough to plug into the nearest phone jack

·                         External wireless network adapters for each connected computer.www.tartoos.com

Note   In some instances, the wireless network adapters actually go inside the computer but the antenna for transmitting the data is outside of the computer case. www.tartoos.com

Which kind of modem?
If you have a cable modem or DSL (digital subscriber line), which offer higher-speed connections to the Internet than a standard modem, the Internet service is always available, meaning you don't have to wait until you dial up to the Internet service provider (ISP) to get a connection. With a standard modem—for example, a 33.6 Kbps or 56 Kbps modem—you must manually connect each time you want to use the Internet by using dial-up networking, clicking an icon for your ISP on your desktop, or other action.

If you don't know what kind of modem you have, read the documentation that came with your computer, or check the Modem Properties in Control Panel:

1.                       Click the Start button, point to Settings, and then click Control Panel.

2.                       Click the Modem icon.

3.                       On the General tab, click Properties (be careful you don't click Dialing Properties).